Description
The RS-RFW-300 fiber laser welding machine for eyewear adopts an automatic platform, rotating table, automatic lifting laser beam and new four-dimensional technology, which is fast in welding speed, high in accuracy, and good in optical mode, and is suitable for laser precision welding...
Share:
Introduction:
The RS-RFW-300 fiber laser welding machine for eyewear adopts an automatic platform, rotating table, automatic lifting laser beam and new four-dimensional technology, which is fast in welding speed, high in accuracy and good in optical mode, and is suitable for laser precision welding of different kinds of metal spectacle frames.
Laser welding machine for eyewear is a new type of welding solution, which can realize spot welding, butt welding, stick welding, and seal welding, with high depth width ratio, small weld width, small heat affected area, small deformation, fast welding speed, flat and beautiful weld, no or simple treatment after welding, high weld quality and no porosity It has the advantages of precise control, small focus point, high positioning accuracy, and easy automation. Generally, filler solder is not used, so the fit-gap between parts is less than 15% of the thickness of the most refined parts. All parts of the parts should be relatively clean because the welding speed is very fast, there is no time to burn off impurities.
Advantages
High efficiency: it adopts continuous fiber laser source, good optical mode, high peak power, compared with the traditional pulsed fiber laser source, the photoelectric conversion efficiency improved 50%.
High performance: smooth and fine welding lines, saving later polishing and electroplating process, exclusively for high-end customized products, improving product added value.
Low consumption: the rated power of the equipment is 2kW, and the overall power consumption is more than 50% lower than that of the lamp-pumped equipment.
Small size: The overall size of the equipment is 760 * 1078 * 1017mm, which is convenient for handling and saves the floor space.
Technical Services & Training
1. Installation and commissioning: The installation and commissioning of the equipment are completed by our engineers, and you can send someone to participate in learning, understanding, and cooperation.
2. Training: Our company guarantees to assign experienced and qualified technical personnel to be responsible for training. Relevant training can be conducted twice:
● After the two parties have signed the order contract, you can send 1 to 2 operating and daily maintenance personnel to our company to participate in free training, the training time is not less than 1 working day.
● The training content includes: equipment operation and daily mechanical and electrical maintenance, etc., and ensure that participants can operate the equipment independently.
● After the equipment installation and commissioning are qualified, our company's technical staff will train relevant personnel at your production site. The training content includes equipment operation, programming, daily mechanical and electrical maintenance, and processing training.
3. Warranty: Our company provides a free warranty period of 24 months from the date of shipment for the equipment host. If the equipment fails during the warranty period, our company is responsible for free maintenance, including the replacement of necessary parts.
4. Maintenance: Our company implements life-long maintenance on the equipment. After the warranty period expires, if the equipment fails to repair, our company will charge a reasonable maintenance cost.
Technical parameter:
Model | RS-RWF-300 |
Laser power | 300W |
Laser wavelength | 1064nm |
Laser spot diameter | 0.1-3mm |
Welding depth | <2mm |
Positioning system | CCD co-axis monitor |
XYZ table travel | 200*200*150+C-axis rotary |
Working table | Customized fixture for single station |
Cooling mode | Water-cooling |
Power suppy | 380V/ three phase/ 50Hz/ 60A |
Machine dimension | 760*1078*1017mm |