威廉希尔官方下载May 04, 2020
Like laser marking and laser welding, laser welding machine can be divided into many types, among which galvanometer scanning laser welding machine is one of them. You may be unfamiliar with this equipment, and you can't help asking what the equipment is for? Can you use your own industry? Please follow the steps of KING'S laser to see the application of the galvanometer laser welding machine in the battery industry, mobile phone industry, and electronic packaging industry.
1. Battery welding
Due to its low heat input, small weld spot, and small thermal deformation, it is especially suitable for high-efficiency laser spot welding and densification in the battery industry.
Seal welding. The original hard light transmission laser welding machine is used to weld the battery cap, with an efficiency of 1100 / h. The galvanometer scanning laser spot welding machine is used to weld the battery cap (multi-point), with the efficiency of 2000 / h if the rotary table is used, and 5000 / h if the reciprocating welding is used. The welding efficiency is 2-5 times of the original. In addition, the application of galvanometer scanning welding technology not only improves the efficiency of welding but also improves the quality of welding.
Laser scanning welding machine with rotary table
2. Welding of mobile phone shell
The galvanometer scanning laser welding has the advantages of less energy input, small heat-affected zone, small solder joint, and beautiful appearance. The spot welding position of the metal mobile phone shell has regularity. It is convenient to control the scanning path of a galvanometer by programming, so as to realize fast welding. Welding efficiency can be increased by four times.
laser scanning welding of metal mobile phone shell
3. Electronic packaging
The optical fiber laser micro brazing system based on galvanometer scanning selectivity has been successfully applied to electronic packaging to realize the program-controlled instantaneous multi-point welding energy input. BGA package is widely concerned because of its many advantages, such as many I / O pins, small parasitic parameters, small-signal transmission delay, high reliability and assembly yield, less thickness and weight than the previous package, coplanar welding for assembly and so on. During the process of ball planting and solder bump making, it is very important for BGA packaging technology. In laser micro brazing, the welding system can complete large-area micro spot welding in an instant, and the size of the solder joints can reach 50-100 μ m, which can improve the strength of solder bump, reduce the generation rate of defects, improve production efficiency and reduce environmental pollution. Its efficiency is equivalent to that of reflow soldering, and it is a new technology instead of traditional reflow soldering.
Laser planting ball
(1) When the laser spot is aligned in the welding process, the penetration is the largest. The change in pulse frequency has a great influence on welding penetration. With the increase of frequency, the shape of the weld pool changes from V-shape to U-shape, and the weld penetration becomes shallow, which leads to a decrease of strength. The frequency is chosen between 20Hz and 30Hz. Through the adjustment of spot location and welding frequency, the problem of insufficient weld strength of power battery is solved successfully. (2) Galvanometer scanning laser welding has been successfully applied to the welding of battery, mobile phone shell, and electronic package. The production efficiency and welding quality have been improved, which is a very promising technology.