威廉希尔官方下载

Factors That Affecting The Cutting Effect of Metal Laser Cutting Machine

Feb 11, 2020

The cutting effect of metal laser cutting machine is a topic that many people are very concerned about, especially when different people operate and the cutting effect is different. It shows that the cutting effect of metal laser cutting machine is not related to the equipment itself. So what factors are related to the cutting machine of metal laser cutting machine?

There are various factors that affect the cutting effect of metal laser cutting machines.

1.Focus position

The focus of the laser cutting machine can be aligned, and the precision and accuracy of the cutting can reach the desired requirements.

2.Cutting speed

In fact, no matter what kind of material, the cutting speed and material are extremely consistent, then the cutting effect is the best at this time, too fast or too slow will affect the laser cutting.

3.Material thickness and roughness

Laser cutting is most suitable for cutting thin plates. The thickness of the best effect is carbon steel below 12mm and stainless steel below 6mm. The quality of the processing is significantly enhanced, and the efficiency is also guaranteed. If you cut <1mm material, the cut will be extremely smooth. Material surface roughness, material surface roughness also determines the quality of the cut. Generally, the smoother the material, the better the cut quality.

4.Working power and mode of laser equipment

It has been proved through research that the higher the power of the laser equipment, the better the effect will be, even when cutting the same sheet. The laser cutting mode and material have a certain degree of agreement, the higher the effect, the better.

5.Auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities adhere to the material, and the cutting opening becomes smoother. Generally speaking, the cutting speed of oxygen is the fastest, the cutting effect of nitrogen is the best, and the cost is low. Different gases will have different cutting effects.




Related News

Product Recommended

  • CO<sub>2</sub> Laser ...
  • Surgical Instruments ...
  • Jewellery Laser Weldi...
  • Steel Plate Laser Cut...
  • Leather Laser Engravi...
  • Mold Rust Removal Las...

share